Gaps & Cracks · Documents read 2026-09-08

Loctite Tite Foam Gaps & Cracks

Flexible white 1 in gap filler with the clearest consumer sheet in the set and 21,643 ratings; the sheet says it is not a fire stopping material.

Trigger can, 12 fl oz White Gaps and cracks

4 of four things confirmed

These are the four things we could check for a gaps & cracks can, and nothing else. Not a performance score: nothing on this page was applied or tested by us. How the gaps & cracks page is ordered.

  • Brand data sheeta technical data sheet is published by the brand
  • Claim checkableThe gap limit, the maximum joint width and a theoretical bead yield are all printed in a dated data sheet.
  • Brand-channel sellerSold by Loctite (Henkel), the brand buyer.
  • 100 or more ratings21,814 ratings on the anchor listing

Before you decide

Loctite Tite Foam Gaps & Cracks, Trigger can, 12 fl oz

Format
Trigger can, 12 fl oz
Job
Gaps & Cracks
Documents on file
2, last read 2026-09-08
Claim checkable
Yes, see the record

Research summary, not a hands-on test. Product claims on this page are attributed to the sources and dates shown. Before use, read the exact product label, the current safety data sheet and the application instructions, and confirm ventilation, protective equipment, occupant isolation and re-entry or reoccupancy conditions. A surface-burning classification alone does not establish approval to leave foam exposed or to use it in a particular assembly.

Report a product error The claim What the documents state Documents Sizes and prices Right of reply

The claim, in the seller's words

"Expands to fill, seal, and insulate gaps & cracks inside or out up to one inch." The sheet also says the product "is not a fire stopping material and SHOULD NOT be used in areas that require fireproof or fire stopping materials."
Loctite technical data sheet, revision January 15, 2025

What the documents state

Gap sizeUp to 1 in; maximum joint width 1.6 inTDS, Jan 15, 2025
YieldAbout 134 ft of 3/8 in bead per 12 fl oz can, stated as a theoretical figureTDS
Cured formFlexible solid, dimensional stability under 5 percent (TM 1004-2012)TDS
Working rangeAmbient 23 to 95 F, can at 41 F or above; tack-free 6 to 8 min at 73 F and 50 percent RHTDS
FireNot a fire stopping material, in the sheet’s own wordsTDS

Our reading

The most-reviewed can in the whole intake by a wide margin, 21,643 ratings on September 7 and a "10K+ bought in past month" badge on September 8. The data sheet is the clearest consumer sheet we hold: it gives a joint width, a bead yield and, unusually, a plain sentence that the foam is not a fire stopping material. The flexibility claim is what separates it from the rigid polyurethane fillers on this page; the sheet describes the cured foam as a flexible solid.

Still open

  • Loctite lists one size on Amazon under its own name. The Big Gaps sibling, rated to 3 in on its own sheet, was not in the intake.
  • No R-value or thermal figure is published, which is appropriate for a gap filler and worth noticing when other cans print one.

Documents on file

Sizes and prices, latest read October 29, 2026

Each displayed price is what that listing showed on the date printed in its row; ratings were read October 29, 2026. A pack with no price is one where the listing showed none, where the figure contradicted another variant, or where its last successful read passed the freshness window. Prices are snapshots, each dated where it appears, not live figures, so check the seller before you pay.

The one Amazon listing we hold for this can had no purchase option on October 29, 2026 and named no seller, so it carries no price.

PackPricePer ounceDemand
1 x 12 oz no price shown read Oct 29, 2026 out of stock when read not comparable Check price

As an Amazon Associate I earn from qualifying purchases. That fee never sets the order or the score.

Jobs where a can from this category is part of the answer

These pages name the category rather than this particular can. Each one sets out the constraint that decides the product for that assembly, the code section that applies, a worked quantity example, and where foam is the wrong answer.

  • Attics As gaps and cracks foam. Top plates, wire holes, plumbing chases and the hatch perimeter are gap-filler work; Loctite Tite Foam and Kraken Bond Gaps & Cracks carry the clearest sheets.
  • Rim joists As gaps and cracks foam. For the sill-to-foundation joint and the wire and pipe holes through the rim, before the surface foam goes on.
  • Sheds As gaps and cracks foam. Sheds leak at the sill and the corners; the sealant goes on first.
  • Metal Buildings As gaps and cracks foam. Every screw line, conduit, hydrant and vent through a steel skin is an air path. Sealing those is cheap and it is the part of the job that pays back fastest.
  • Pole Barns As gaps and cracks foam. Every screw line, hydrant, conduit and vent through the skin is an air path, and in a barn the eave and the sliding door jambs are the big ones. Sealing those is cheap and it pays back fastest.
  • Sound Control As gaps and cracks foam. The part of this job that reliably works. Outlet boxes on a shared wall, the gap where a pipe or duct crosses between rooms, the perimeter of a partition at the top plate. Cheap, checkable, and it removes the paths that make an assembly rating meaningless.

Compared side by side

Others on the gaps & cracks page

All 19 gaps & cracks records

Questions and answers

Questions about Loctite Tite Foam Gaps & Cracks

Answered from this product’s documents and listings, the same records the rest of this page is built from.

Ask your own
  1. Does Loctite publish a data sheet for the Tite Foam Gaps & Cracks? From the records

    A technical data sheet is published by the brand.

  2. Can the gaps & cracks claim on this can be checked? From the records

    The gap limit, the maximum joint width and a theoretical bead yield are all printed in a dated data sheet.

  3. Who sells the Loctite Tite Foam Gaps & Cracks on Amazon? From the records

    Sold by Loctite (Henkel), the brand buyer.

We have not sprayed or tested this product. Every figure above names the document or listing it came from, and where a maker publishes nothing the record says so. The photograph is the maker's own product shot where one is published; this one came from the marketplace listing. Read the rating method and our editorial policy.

Loctite has a right of reply

Everything on this page is a dated reading of documents that can change. If you make or sell this product, or you have read something here that is wrong, send the document. Every submission is read against the record; where it changes the record, the change is dated on the page, and where it does not, the reply says why. A submission cannot buy a position or remove a finding the documents still support, and what moves a record is written down.

Write to the research desk or copy research@beestsprayfoam.com