Gaps & Cracks · Documents read 2026-09-13
TYTAN Professional Fill All
Contractor 24 oz gun foam whose dated June 2026 sheet prints the full UL 723 pair and, unusually, says its bead yields are theoretical calculations from a free-foaming test.
3 of four things confirmed
These are the four things we could check for a gaps & cracks can, and nothing else. Not a performance score: nothing on this page was applied or tested by us. How the gaps & cracks page is ordered.
- Brand data sheeta technical data sheet is published by the brand
- Claim checkableThe dated sheet covers the 24 oz gun can sold here and states its own yield method, RB/024, in writing. The UL 723 figures carry no tested thickness, laboratory or file number for the UL classified line.
- Brand-channel sellerSold by Selena USA Inc, which carries only the TYTAN Professional line in our intake.
- 100 or more ratings11 ratings on the anchor listing, under the 100 we ask for
Before you decide
TYTAN Professional Fill All, Gun, 24 oz
- Format
- Gun, 24 oz
- Job
- Gaps & Cracks
- Documents on file
- 1, last read 2026-09-13
- Claim checkable
- Yes, see the record
Research summary, not a hands-on test. Product claims on this page are attributed to the sources and dates shown. Before use, read the exact product label, the current safety data sheet and the application instructions, and confirm ventilation, protective equipment, occupant isolation and re-entry or reoccupancy conditions. A surface-burning classification alone does not establish approval to leave foam exposed or to use it in a particular assembly.
Report a product error The claim What the documents state Documents Sizes and prices Right of reply
The claim, in the seller's words
"Gap & Crack Filler for Windows, Doors & Walls, Air Seal, Waterproof Polyurethane Foam." What the documents state
| Fire | UL 723 (ASTM E84) flame spread 15, smoke developed 10, and UL classified; DIN 4102 class B3 and EN 13501-1 class F on the same sheetTDS 08.06.2026 |
|---|---|
| Yield | The same table prints 502 ft for a "1/2 in width bead" and 1,463 ft for a "1/2 in bead". It describes the 1,463 ft figure as a theoretical calculation from free-foaming yield under internal method RB/024, but does not reconcile the two 1/2 in rowsTDS 08.06.2026 |
| Expansion | 90 to 130 percent post-expansion; 24-hour full cureTDS 08.06.2026 |
Our reading
The most recently dated sheet of the four TYTAN cans here, updated June 2026, and one of the few documents in this whole intake that states how its own bead-yield figures were produced: theoretical calculations from a free-foaming test under internal method RB/024. Read the table carefully, because it prints 502 ft for a "1/2 in width bead" and 1,463 ft for a "1/2 in bead" without explaining the difference. It also carries the full UL 723 result to ASTM E84 at flame spread 15 and smoke developed 10 and says it is UL classified, alongside DIN 4102 class B3 and EN 13501-1 class F in the same table.
Still open
- The sheet prints 502 ft and 1,463 ft for two differently worded 1/2 in bead rows and does not reconcile them.
- UL classified is stated without a file or control number.
- No tested thickness or laboratory for the UL 723 result.
Documents on file
- TDS TYTAN Professional Fill All technical data sheet 08.06.2026 read 2026-09-13
Sizes and prices, latest read October 29, 2026
Each displayed price is what that listing showed on the date printed in its row; ratings were read October 29, 2026. A pack with no price is one where the listing showed none, where the figure contradicted another variant, or where its last successful read passed the freshness window. Prices are snapshots, each dated where it appears, not live figures, so check the seller before you pay.
| Pack | Price | Per ounce | Demand | |
|---|---|---|---|---|
| 1 x 24 oz | $19.00 read Oct 29, 2026 | $0.79 | not shown | Check price |
| 12 x 24 oz Cheapest per ounce | $129.00 read Oct 29, 2026 | $0.45 | not shown | Check price |
As an Amazon Associate I earn from qualifying purchases. That fee never sets the order or the score.
Jobs where a can from this category is part of the answer
These pages name the category rather than this particular can. Each one sets out the constraint that decides the product for that assembly, the code section that applies, a worked quantity example, and where foam is the wrong answer.
- Attics As gaps and cracks foam. Top plates, wire holes, plumbing chases and the hatch perimeter are gap-filler work; Loctite Tite Foam and Kraken Bond Gaps & Cracks carry the clearest sheets.
- Rim joists As gaps and cracks foam. For the sill-to-foundation joint and the wire and pipe holes through the rim, before the surface foam goes on.
- Sheds As gaps and cracks foam. Sheds leak at the sill and the corners; the sealant goes on first.
- Metal Buildings As gaps and cracks foam. Every screw line, conduit, hydrant and vent through a steel skin is an air path. Sealing those is cheap and it is the part of the job that pays back fastest.
- Pole Barns As gaps and cracks foam. Every screw line, hydrant, conduit and vent through the skin is an air path, and in a barn the eave and the sliding door jambs are the big ones. Sealing those is cheap and it pays back fastest.
- Sound Control As gaps and cracks foam. The part of this job that reliably works. Outlet boxes on a shared wall, the gap where a pipe or duct crosses between rooms, the perimeter of a partition at the top plate. Cheap, checkable, and it removes the paths that make an assembly rating meaningless.
Compared side by side
Others on the gaps & cracks page
All 19 gaps & cracks records
Questions and answers
Questions about TYTAN Professional Fill All
Answered from this product’s documents and listings, the same records the rest of this page is built from.
-
Does TYTAN Professional publish a data sheet for the Fill All? From the records
A technical data sheet is published by the brand.
-
Can the gaps & cracks claim on this can be checked? From the records
The dated sheet covers the 24 oz gun can sold here and states its own yield method, RB/024, in writing. The UL 723 figures carry no tested thickness, laboratory or file number for the UL classified line.
-
Who sells the TYTAN Professional Fill All on Amazon? From the records
Sold by Selena USA Inc, which carries only the TYTAN Professional line in our intake.
We have not sprayed or tested this product. Every figure above names the document or listing it came from, and where a maker publishes nothing the record says so. The photograph is the maker's own product shot where one is published; this one came from the brand store. Read the rating method and our editorial policy.
TYTAN Professional has a right of reply
Everything on this page is a dated reading of documents that can change. If you make or sell this product, or you have read something here that is wrong, send the document. Every submission is read against the record; where it changes the record, the change is dated on the page, and where it does not, the reply says why. A submission cannot buy a position or remove a finding the documents still support, and what moves a record is written down.
Write to the research desk or copy research@beestsprayfoam.com